Blackburn Model Supplies Ltd (Incorporating Balsa Mart)
Newsletter

Tissue Paste - Now Available Again
Formulated paste for bonding tissue used on traditional model airplanes. The formulation allows delicate tissue paper to be placed onto airframes and smoothed without tearing. Dries clear.
By Deluxe Materials, 50ml £4.25

PowerPal DC Balance Charger/Discharger & Cycler £39.99
Small & compact, this 12V DC cg=harger features microprocessor controlled high performance charger/discharger/cycler for Nicad/Nimh/LiPo/Lead Acid batteries with an integrated cell voltage balancer.
Charge Rate: 0.1A - 5A
Discharge Rate: 0.1A - 1A
Will charge 1 to 6 cell lipos, 1 to 15 cells Nicad/Nimh & 2 to 20V lead acid

ASM Model Stand - Large £24.99
A tough and durable model stand that is suitable for both aircraft and boats. Constructed from plywood and then lacquered, it just requires a little epoxy to assemble in a few minutes. The cradle is fully adjustable via an easy to use hand knob and sliding compartments. Being a little taller, this version is ideal for bigger models and yachts, etc.
Fuel-resistant finish
Quick assembly
Fully adjustable foam padded cradles
Use on the field and in the workshop
Requires fast setting epoxy for assembly (not included.)

Bullet A.R.T.F.  £99.99
The legendary '70s Bullet returns and is set to create a stir amongst an entirely new generation of model pilots. The original Bullet was regarded by many as the definitive sports model of its time and this new improved version will undoubtedly achieve the same iconic status. The Ripmax Bullet enjoys a 10% size increase over the original to cater for today's modern high output engines. This also provides for a lighter wing loading and improved in-flight handling characteristics. And......what's more, this time it comes factory built and lovingly hand finished!
High quality ARTF construction
Outstanding flight performance
Length: 1290mm (50.8")
Radio system: 4 channel (not included)
I.C. engine: 46-55 2 stroke (not included)
Minimal assembly time
Wingspan: 1475mm (58")

Wot 4-E Mk2 ARTF
The demand has been growing for a tough yet superbly performing sport aerobatic model - what could fulfil this role better than a scaled down and purpose designed electric version of the famed WOT 4? Developed around popular 3 cell 2100~2500mah Li-Po battery packs, the WOT 4-E has an amazing performance and is ideal for small field use - or where there are noise restrictions - yet is large enough to hold its own at the busiest flying sites. The model is strong and light with the additional benefit of an easy access battery mount with magnetically secured hatch cover - no need to take the wings off with model.
Wingspan: 1200mm (47")
Length: 1050mm (41")
Radio system: 4 channel with 4 servos (not included)
Electric Motor: 2820/05 (not included)

WOT 4 Mk2 Foam-E ARTF £129.99 NOW IN STOCK
This is not just any foam model! It is a very clever WOT 4 that can be flight ready in under 30 minutes! The beautiful EPO mouldings hide an innovative internal structure that adds strength where needed and locks all the components together. The impressive specification includes a carbon main spar, carbonfuselage spine, shock resistant engine mount, simple battery access and battery retaining moulding, with further carbon reinforcement for the tail plane and ailerons. The four servos, brushless motor and 30A ESC are all pre-installed. just add a receiver and a 3 cell 2100-2500mah battery of your choice then let the fun begin!
Wingspan: 1205mm (47.4")
Length: 1050mm (41")
Servos: 4 servos (included)
Radio system: 4 channel (not included)
Electric Motor: 3536 820kv (not included)

Irvine Tutor 40 II ARTF £74.99
Improving upon the nation's favourite trainer was never going to be an easy challenge, but the all-new Tutor II successfully combines all the features that made it number 1, with further refinements that encompass the latest improvements in model flight technology. It includes a specially developed tapered wing for improved aileron response with a more predictable feel and cleverly designed tail surfaces that make spin recovery a breeze. The Tutor II has an easy access battery hatch and custom hardware that make it as simple to assemble and fly with either electric motors or glow power sources. Incorporating a fresh dynamic colour scheme that makes it even easier to track in the air. Like it's predecessor, the Tutor II has a fully illustrated colour instruction manual that is simple for the learner to follow and ensures success first time. In fact, the instruction manual of the Tutor II sets the industry standard for trainer manuals and the Tutor II maintains that tradition.
Step by step photo illustrated instructions
Choice of power options
Easy to track colour scheme
Built in battery access hatch
Radio System: 4-6 channel (not included)
.40 - .46 2 stroke glow engine (not included) or
KMS Quantum 4120/05 motor, 60a speed controller, and 3 or 4 cell 4000mah LiPo (not included)
Wingspan: 1635mm (64.37")
Length: 1200mm (47.24")
Weight: 2.52kg (5.56lbs)
Servos: 4 for glow power, 3 for electric power (not included)

£12.48
2-4 cell light activated cell voltage meter